[pct-l] Canister

[Montedodge@aol.com]

In building your canister out of 8 inch PVC and after caps are glued in place.
Put a thick bead of epoxy around edge of caps, then take a popcycle stick to
smooth out the epoxy to create a hard taper from the cap edges to the canister
body. This will keep claws off the edge of caps and keep them from pulling the
caps off. This is a very good design. If some of you doubters have a better
design, I,d love you to share it with us.
* From the Pacific Crest Trail Email List |  http://www.backcountry.net   *

==============================================================================