[pct-l] Alcool stove questions
Chris Pratt
chris.pratt89 at yahoo.com
Sun Mar 17 17:22:19 CDT 2013
Patrick,
Not to sure about that design, I've always used a penny stove. It uses
the bottoms of three cans to make (just google it). The top of the
stove is the bottom of a can with the burner holes around the outside
edge like in the eagle scout stove and a larger hole in the center of
the top to pour the alcohol into, then you place a coin over the hole
and it allows enough pressurization of the can to get excellent burn
characteristics. Normally after you have filled the stove with an ounce
of fuel, you place the coin over the fill hole and then place a small
amount of fuel on top to help prime/light the stove.
It looks like with the pop top hole on the top you would not be able to
get any pressure build up in the burner chamber thus the lack of a
consistant flame and the alcohol vaporizing but not burning.
Chris
More information about the Pct-L
mailing list