[pct-l] pole maintance

[Jim & Jane Moody]

I wrapped several turns of duct tape around the pole, just under the handle.  This also works well when the telescoping joints try to telescope but you don't want them to. 



Mango 


----- Original Message ----- 
From: "Amanda L Silvestri" <aslive at sbcglobal.net> 
To: pct-l at backcountry.net 
Sent: Wednesday, October 27, 2010 9:32:54 PM 
Subject: [pct-l] pole maintance 

The rubber handle on one of my tracking poles has come loose and has slid about three inches down the pole shaft.  I can nudge it back up but it keeps working it's way back down again.  I want to secure it.  For adhering rubber to metal would rubber cement, an A/B epoxy, hot glue or some other adhesive be the best way to go? 

Shepherd 
_______________________________________________ 
Pct-L mailing list 
Pct-L at backcountry.net 
To unsubcribe, or change options visit: 
http://mailman.backcountry.net/mailman/listinfo/pct-l 

List Archives: 
http://mailman.backcountry.net/pipermail/pct-l/