[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [pct-l] Slippery Floor
Yes, Both Kurt Russell and Stephanson use GE Silicon II door and Window
Sealler Cut with thinner ( or other organic solvents). You can put it all
in a squeeze bottle, shake it up and you are ready to go. Put a nail in
the entrance or seal, put in cool place and it will last for a couple days
so that you can seal your seams one at a time over a period of days. The
stuff seems to stay tacky for a while sometimes. I like to dab it on and
then take a plastic kitchn spatulato make a take off the excess and clean
up the appearance ( it also pushes the sealer into small crevices). It can
be put on extremely thinnly. You can squugee with the spathula until there
is almost none on the fabric.
Goforth
----------
> From: Slyinmd@aol.com
> To: reynolds@ilan.com; goforth@cio.net
> Cc: pct-l@backcountry.net
> Subject: Re: [pct-l] Slippery Floor
> Date: Monday, March 15, 1999 5:52 AM
>
> Jack Stephenson and Kurt both suggest cutting silicone caulk with paint
> thinner and laying several thin ribbons of the solution on the tent
floor. I
> think Kurt also uses the stuff as a seam seal. He had the junk in a
clear
> squeeze bottle with nozzle, the type you see at restaurants for catsup or
> mustard and applied it to a floor at the Ruck in Pennsylvania earlier
this
> year, for an AT hiker that had just received his tent.
>
> Solution, stuff, junk, I don't what you call it! If he was lurking and
not so
> busy sewing he may have been able to tell us himself! ; )
>
> Sly
> * From the Pacific Crest Trail Email List | http://www.backcountry.net
*
* From the Pacific Crest Trail Email List | http://www.backcountry.net *
==============================================================================